Moxa ioLogik E2240

Ethernet Micro RTU Controller , 8 Analog Giriş ( AI ), 2 Analog Çıkış ( AO )

  • Patentli Active OPC Server özelliği ile aktif iletişim.I/O cihazı doğrudan verileri Active OPC sunucuya gönderir.
  • E-mail, SNMP Trap, TCP, UDP yöntemleri ile akıllı alarm sistemi
  • SNMPv1/v2c/v3 protokol dessteği
  • Peer-to-peer iletişim mimarisi, uzak noktadaki DI girdilerini merkezdeki I/O ünitesinin DO çıkışlarına atamak çok kolay
  • Patentli Click&Go control logic ile IF-THE-ELSE temelli kurallar eklemek çok kolay. 24 kurala kadar destekler
  • Kullanıcı dostu Web arabirimi ile de konfigürasyon opsiyonu

ModbusTCP gibi Pull temelli veri toplama yerine daha kolay ve prtaik Push teknolojisine dayanan Active OPC çözümü Moxa tarafından sunulmaktadır. 

Click&Go mantık kuralları ile set edilen bir durum oluştuğunda alarm’ı süremek, ilgili kişilere e-mail göndermek, SNMP-Trap göndermek çok kolay.  

ioLogik E2240 Specifications

• Inputs and Outputs

Analog Inputs

8 channels

Analog Outputs

2 channels

• Analog Input

Type

Differential input

Resolution

16 bits

I/O Mode

Voltage / Current

Input Range

±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA, 4 to 20 mA

Accuracy

±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C

Sampling Rate

All channels:
• 10 samples/sec for voltage
• 6 samples/sec for current
Per channel:
• 1.25 samples/sec for voltage
• 0.75 samples/sec for current
Single channel:
• 1.25 samples/sec for voltage
• 0.75 samples/sec for current

Input Impedance

900k ohms (min.)

Built-in Resistor for Current Input

120 ohms

Isolation

3k VDC or 2k Vrms

• Analog Output

Resolution

12 bits

Output Range

0 to 10 V, 4 to 20 mA

Drive Voltage

15 VDC for current output

Accuracy

±0.1% FSR @ 25°C,
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C

Load Resistor

Less than 250 ohms

• Power Requirements

Power Consumption

198 mA @ 24 VDC

• MTBF (mean time between failures)

Time

155,941 hrs

Database

Telcordia (Bellcore)

Common Specifications

• LAN

Ethernet

1 10/100 Mbps RJ45 port

Protection

1.5 kV magnetic isolation

Protocols

Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP

• Serial Communication

Interface

RS-485-2w: Data+, Data-, GND (3-contact terminal block)

Serial Line Protection

15 kV ESD for all signals

• Serial Communication Parameters

Parity

None

Data Bits

8

Stop Bits

1

Flow Control

None

Baudrate

1200 to 115200 bps

Protocol

Modbus/RTU

• Power Requirements

Power Input

24 VDC nominal, 12 to 36 VDC

• Physical Characteristics

Wiring

I/O cable max. 14 AWG

Dimensions

115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)

Weight

under 250 g

Mounting

DIN rail or wall

• Environmental Limits

Operating Temperature

Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

Altitude

Up to 2000 m

Note

Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

• Standards and Certifications

Safety

UL 508

EMI

EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC Part 15, Subpart B, Class A

EMS

EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-8,
EN 61000-4-11, EN 61000-6-2

Shock

IEC 60068-2-27

Freefall

IEC 60068-2-32

Vibration

IEC 60068-2-6

Green Product

RoHS, CRoHS, WEEE

Note

Please check Moxa’s website for the most up-to-date certification status.

• Warranty

Warranty Period

5 years (excluding ioLogik E2214*)

*Note

Because of the limited lifetime of power relays, products that use that component are covered by a 2-year warranty.

Details

See www.moxa.com/warranty

Modeller

ioLogik E2240

Ethernet Micro RTU Controller with 8 analog inputs and 2 analog outputs

ioLogik E2240-T

Ethernet Micro RTU Controller with 8 analog inputs and 2 analog outputs, -40 to 85°C operating temperature