Moxa IA261-I/IA262-I Serisi

Moxa IA261-I/IA262-I Serisi

RISC-tabanlı fansız bilgisayar, 2 yada 4 optik izolasyonlu serial portlar, çift LAN portu, VGA, CAN, DIO, CompactFlash, USB

Cirrus Logic EP9315 ARM9 CPU, 200 MHz

128 MB RAM on-board, 32 MB flash disk

VGA arayüzü ile saha izleyebilme

2 KV dijital izolasyonlu RS-232/422/485 seri portlar

Ethernet yedekliliği için Çift 10/100 Mbps

CAN portlarında 2 KV dijital izolasyon ve CANopen protokol desteği

8+8 DI/DO ve 3 KV optik izolasyon koruması

12 – 48 VDC yedekli güç girişleri

CompactFlash ve USB 2.0 host desteği

Tak-çalıştır Linux yada WinCE 6.0 platformu

-40 – 75°C arası geniş sıcaklık toleransı

Hardware Specifications
• Computer
CPU Cirrus EP9315 ARM9 CPU, 200 MHz
OS (pre-installed) Windows CE 6.0 or Linux
DRAM 128 MB onboard
Flash 32 MB onboard
USB USB hosts x 2, compliant with USB 2.0 (OHCI) type A connectors
• Storage
Storage Expansion CompactFlash slot
• Display
Graphics Controller EP9315 internal graphics accelerator engine with TTL graphical signal support
Display Memory Dynamic video memory (shares system memory)
Display Interface CRT interface for VGA output, DB15 female connector
Resolution 1024 x 768, 8 bits
• Ethernet Interface
LAN 2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection 1.5 kV built-in
• Serial Interface
Serial Standards 2 or 4 RS-232/422/485 ports, software-selectable (DB9 male)
ESD Protection 4 kV for all signals
Isolation 2 kV digital isolation
Console Port RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
• Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details)
• Serial Signals
RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
• Digital Input
Input Channels 8, source type
Input Voltage 0 to 30 VDC
Digital Input Levels for Dry Contacts • Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts • Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (COM to DI)
Connector Type 10-pin screw terminal block (8 points, COM, GND)
Isolation 3 kV optical isolation
• Digital Output
Output Channels 8, sink type
Output Current Max. 200 mA per channel
On-state Voltage 24 VDC nominal, open collector to 30 V
Connector Type 9-pin screw terminal block (8 points, GND)
Isolation 3 kV optical isolation
• CANbus Communication (IA262 models only)
Interface Dual optically isolated CAN2.0A/2.0B compliant ports
CAN Controller Phillips SJA1000T
Signals CAN-H, CAN-L
Isolation 2 kV digital isolation
Speed 10 kbps to 1 Mbps
Connector Type DB9 male
• LEDs
System Power, Ready, Storage
LAN 10M/Link x 2, 100M/Link x 2 (on connector)
Serial TxD x 4, RxD x 4
IA261-I: P1 to P4 for serial ports
IA262-I: P1 to P2 for serial ports, P3 to P4 for CAN ports
• Switches and Buttons
Reset Button Supports “Reset to Factory Default”
• Physical Characteristics
Housing Aluminum, industrial vertical form factor
Weight 950 g
Dimensions 60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in)
Mounting DIN rail, wall
• Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Anti-vibration 5 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock 50 g @ IEC-68-2-27, half sine wave, 11 ms
• Power Requirements
Input Voltage Redundant power input design
PWR1: 12 to 48 VDC (3-pin terminal block)
PWR2: 12 to 48 VDC (power jack with thread)
Power Consumption With no load on USB ports: 5.8 W
• 240 mA @ 24 VDC
• 480 mA @ 12 VDC
With full load on USB ports: 11 W
• 450 mA @ 24 VDC
• 900 mA @ 12 VDC
• Standards and Certifications
Safety UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1
EMC EN 61000-6-4, EN 61000-3-2 Class D, EN 61000-3-3, EN 61000-6-2, FCC Part 15 Subpart B Class A
Green Product RoHS, CRoHS, WEEE
• Reliability
Alert Tools Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures) IA261-I: 118,752 hrs
IA261-I: 131,832 hrs
• Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty

Available Models

IA261-I-CE: RISC-based embedded computer with 4 serial ports, DIO, dual LANs, VGA, Compact-Flash, USB, Win CE 6.0 OS(Operating Temperature: -10 to 60°C)
IA261-I-LX: RISC-based embedded computer with 4 serial ports, DIO, dual LANs, VGA, CompactFlash, USB, Linux OS, -10 to 60°C operating temperature
IA261-I-T-CE: RISC-based embedded computer with 4 serial ports, DIO, dual LANs, VGA, Compact-Flash, USB, Win CE 6.0 OS(Operating Temperature: -40 to 75°C)
IA261-I-T-LX: RISC-based embedded computer with 4 serial ports, DIO, dual LANs, VGA, CompactFlash, USB, Linux OS, -40 to 75°C operating temperature
IA262-I-CE: RISC-based embedded computer with 2 serial ports, DIO, dual LANs, VGA, CANbus, CompactFlash, USB, Win CE 6.0 OS(Operating Temperature: -10 to 60°C)
IA262-I-LX: RISC-based embedded computer with 2 serial ports, DIO, dual LANs, VGA, CANbus, CompactFlash, USB, Linux OS, -10 to 60°C operating temperature
IA262-I-T-CE: RISC-based embedded computer with 2 serial ports, DIO, dual LANs, VGA, CANbus, CompactFlash, USB, Win CE 6.0 OS(Operating Temperature: -40 to 75°C)
IA262-I-T-LX: RISC-based embedded computer with 2 serial ports, DIO, dual LANs, VGA, CANbus, CompactFlash, USB, Linux OS, -40 to 75°C operating temperature